ATA Error Count: 6 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 6 occurred at disk power-on lifetime: 25507 hours (1062 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 ff ff ff 4f 00 15d+23:26:38.421 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 15d+23:26:38.420 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 15d+23:26:38.420 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 15d+23:26:38.420 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 15d+23:26:38.419 READ NATIVE MAX ADDRESS EXT
Error 5 occurred at disk power-on lifetime: 25507 hours (1062 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 ff ff ff 4f 00 15d+23:26:35.017 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 15d+23:26:35.016 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 15d+23:26:35.016 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 15d+23:26:35.016 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 15d+23:26:35.015 READ NATIVE MAX ADDRESS EXT
Error 4 occurred at disk power-on lifetime: 25507 hours (1062 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 ff ff ff 4f 00 15d+23:26:31.683 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 15d+23:26:31.683 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 15d+23:26:31.682 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 15d+23:26:31.682 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 15d+23:26:31.682 READ NATIVE MAX ADDRESS EXT
Error 3 occurred at disk power-on lifetime: 25507 hours (1062 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 ff ff ff 4f 00 15d+23:26:28.340 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 15d+23:26:28.339 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 15d+23:26:28.339 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 15d+23:26:28.339 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 15d+23:26:28.338 READ NATIVE MAX ADDRESS EXT
Error 2 occurred at disk power-on lifetime: 25507 hours (1062 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 ff ff ff 4f 00 15d+23:26:24.946 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 15d+23:26:24.945 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 15d+23:26:24.945 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 15d+23:26:24.945 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 15d+23:26:24.945 READ NATIVE MAX ADDRESS EXT